CFP last date
01 January 2025
Reseach Article

Microstrip Parallel Coupled Bandpass Filter Design for Applications at 2.4 GHz

by Vipul M. Dabhi, Ved Vyas Dwivedi
Communications on Applied Electronics
Foundation of Computer Science (FCS), NY, USA
Volume 6 - Number 8
Year of Publication: 2017
Authors: Vipul M. Dabhi, Ved Vyas Dwivedi
10.5120/cae2017652532

Vipul M. Dabhi, Ved Vyas Dwivedi . Microstrip Parallel Coupled Bandpass Filter Design for Applications at 2.4 GHz. Communications on Applied Electronics. 6, 8 ( Mar 2017), 13-16. DOI=10.5120/cae2017652532

@article{ 10.5120/cae2017652532,
author = { Vipul M. Dabhi, Ved Vyas Dwivedi },
title = { Microstrip Parallel Coupled Bandpass Filter Design for Applications at 2.4 GHz },
journal = { Communications on Applied Electronics },
issue_date = { Mar 2017 },
volume = { 6 },
number = { 8 },
month = { Mar },
year = { 2017 },
issn = { 2394-4714 },
pages = { 13-16 },
numpages = {9},
url = { https://www.caeaccess.org/archives/volume6/number8/711-2017652532/ },
doi = { 10.5120/cae2017652532 },
publisher = {Foundation of Computer Science (FCS), NY, USA},
address = {New York, USA}
}
%0 Journal Article
%1 2023-09-04T19:56:23.095848+05:30
%A Vipul M. Dabhi
%A Ved Vyas Dwivedi
%T Microstrip Parallel Coupled Bandpass Filter Design for Applications at 2.4 GHz
%J Communications on Applied Electronics
%@ 2394-4714
%V 6
%N 8
%P 13-16
%D 2017
%I Foundation of Computer Science (FCS), NY, USA
Abstract

Designing Microstrip filter is the prime requirement for optimum and efficient performance of next generation communication systems. This research article presents design, and mathematical and numerical analysis of a parallel coupled microstrip band pass filter, its electrical responses obtained through iterative numerical electromagnetic simulations, and discussions on the results measured and tested after fabrication using FR4 substrate. Comparing this filter with international industry standards for its operational frequency applications at 2.4 GHz using Ansoft Designer Software we found satisfactory parameters such as insertion loss above -5.00 dB, reflection loss below -20 dB, negligible energy loss and frequency bandwidth of 6.25%. Volumetric miniaturization and sustainable compatibility we researched are pivotal in RF and microwave communication spectrum resulting into minimum cost to production and a step towards green earth saving the material extraction from the earth’s crust.

References
  1. Hong, J. S. and M. J. Lancaster, Microstrip Filters for RF/Microwave Applications, John Wiley and Sons, 2001.
  2. G. Mattaei, L. Young, and E.M.T. Jones, Microwave Filters, Impedance Matching Networks, and Coupling Structures, Artech House, Norwood, MA, 1980.
  3. D. M. Pozar, Microwave Engineering, John-Wiley and Sons Inc., 1998.
  4. N.Priyanga, M.Monika. S.Karthie “Performance Comparison of Microstrip Band pass Filter Topologies on Different Substrates”, 2014. IEEE International Conference on Innovations in Engineering and Technology (ICIET14)
  5. “Comparison of the Performance of Microstrip Antenna at 2.4GHz Using Different Substrate Materials”. International Journal of Engineering and Advanced Technology (IJEAT) ISSN: 2249 8958, Volume-3, Issue-4, April 2014.
  6. Mitsuo Makimoto, Sadahiko Yamashita. “Microwave Resonators and Filters for Wireless Communication”, Springer, 2001.
  7. Ved Vyas Dwivedi, Jignesh Patoliya, Y. P. Kosta.” Miniaturized Modeling of a Quasi-Elliptic Tri-Band Pass Filter Using a Folded Tri-Section Stepped Impedance Resonator for Improved Performance” The IUP Journal of Telecommunications, Vol. II, No. 3, pp. 7-18, August 2010 .
  8. Ved Vyas Dwivedi, Microstrip patch antenna using metamaterial.” 2012, Lambert Academic publishing, Germany.
  9. Vipul Dabhi, Ved Vyas Dwivedi. “Theoretical investigations on printed bandpass filter (Design and application perspectives)” Inventi Rapid: Microwave Vol. 2012, Issue 3.
Index Terms

Computer Science
Information Sciences

Keywords

Microstrip Parallel Coupled Filter Scattering Parameters Ansoft Designer